home *** CD-ROM | disk | FTP | other *** search
Novell DOS Client Message | 1996-01-10 | 2.5 KB | 45 lines |
- DOS Client Message File: N16ODI 100, Tran L1.0
- Invalid message file %s
- Program load aborted.
- The Nios to 16-Bit DOS ODI Shim (N16ODI) has been successfully removed.
- The Nios to 16-Bit DOS ODI Shim (N16ODI) has loaded successfully.
- N16ODI is waiting for Nios to load. N16ODI is sleeping.
- N16ODI is currently keeping Nios informed of Critical Section Calls.
- The Nios to 16-Bit DOS ODI Shim has the Following LSL Entry Points:
- LSL Initial Entry Point = %.4X:%.4X
- LSL Protocol Support Entry = %.4X:%.4X
- LSL General Services = %.4X:%.4X
- LSL MLID Support Entry = %.4X:%.4X
- LSL Config Table = %.4X:%.4X
- N16ODI Global Flag Value = %.4X
- N16ODI Critical Section State = %.4X
- Available command line options:
- /? -Displays this help screen
- /U -Removes resident N16ODI from memory
- /S - Displays Current Operating state and entry Points.
- Invalid Command line option was specified: "%s".
- The Nios to 16-Bit DOS ODI Shim (N16ODI) has already been loaded.
- Cannot find a loaded Nios to 16-Bit DOS ODI Shim (N16ODI) to unload.
- The LSL has not been loaded.
- Load the LSL before loading N16ODI.
- Cannot unload N16ODI because another program has been
- loaded above it. Unload the other program or programs and try again.
- N16ODI cannot be unloaded. The installed N16ODI is a
- different version than this N16ODI module
- The Nios to 16-Bit DOS ODI Shim (N16ODI) has not been loaded.
- The Loaded LSL does not have the functionality to run N16ODI
- Update the LSL (v2.11 (08-17-94) or greater ) and try to reload again.
- Updates can be retrieved via anonymous ftp from ftp.novell.com,
- or from COMPUSERVE or from your NetWare Dealer.
- The Nios to 16-Bit DOS ODI Shim (N16ODI) must be loaded
- before any 16-Bit MLIDs. Unload the 16-Bit MLID(s) and try loading
- N16ODI again.
- Unable to Hook Interrupt 2Fh. No Available Slots.
- N16ODI requires a 80386 processor or higher.
- All LAN Drivers must be unloaded before unloading N16ODI.
- Nios is not loaded. N16ODI will activate after Nios loads.
- Nios is outdated. Please update Nios and try to load again.
- CoPyRiGhT=(c) Copyright 1996, by Novell, Inc. All rights reserved.
- VeRsIoN=1.00 Novell Nios to 16-Bit DOS ODI SHIM message file.
- LaNgUaGe= English (English)
-